docs: add PyPI as second supported install route (#3425)

README.md

@@ -51,6 +51,12 @@ Requires **[uv](https://docs.astral.sh/uv/)** ([install uv](./docs/install/uv.md
 uv tool install specify-cli --from git+https://github.com/github/spec-kit.git@vX.Y.Z
 ```
 
+Prefer installing from PyPI? The `specify-cli` package is also published there:
+
+```bash
+uv tool install specify-cli
+```
+
 See the [Installation Guide](./docs/installation.md) for alternative methods, verification, upgrade, and troubleshooting.
 
 ### 2. Initialize a project

docs/install/pypi.md

@@ -0,0 +1,83 @@
+# Installing from PyPI
+
+Spec Kit is published to PyPI as [`specify-cli`](https://pypi.org/project/specify-cli/), maintained by the Spec Kit maintainers. Installing from PyPI is the second supported install route alongside installing from the [GitHub source](../installation.md#install-from-source--persistent-installation-recommended). Use whichever fits your workflow — both provide the same `specify` CLI.
+
+> [!NOTE]
+> The PyPI release version tracks the GitHub release tags (for example, PyPI `0.12.11` corresponds to the `v0.12.11` tag). `specify version` is only a local version/runtime sanity check — it reports the installed version but not where the `specify` executable came from, so it cannot distinguish a PyPI install from a Git install. To confirm the install source, inspect the source metadata your package manager records: `pipx list --json` reports the exact install specification for each tool, and for uv/pip installs you can check the package's [PEP 610](https://peps.python.org/pep-0610/) `direct_url.json` inside its `*.dist-info` directory (a Git or URL install records the repository/archive URL there, while a plain PyPI index install does not create that file). Note that `pip show specify-cli` only prints package metadata and will not see uv/pipx-managed environments from the host interpreter.
+
+## Install Specify CLI
+
+Use whichever Python tool you already have:
+
+```bash
+# Using uv (recommended)
+uv tool install specify-cli
+
+# Or using pipx
+pipx install specify-cli
+
+# Or using pip
+pip install specify-cli
+```
+
+### Install a specific release
+
+Pin an exact version for reproducible installs (check [PyPI](https://pypi.org/project/specify-cli/#history) or [Releases](https://github.com/github/spec-kit/releases) for available versions):
+
+```bash
+# Using uv
+uv tool install specify-cli==0.12.11
+
+# Or using pipx
+pipx install specify-cli==0.12.11
+
+# Or using pip
+pip install specify-cli==0.12.11
+```
+
+## Verify
+
+```bash
+specify version
+```
+
+## Initialize a project
+
+```bash
+specify init <PROJECT_NAME> --integration copilot
+```
+
+## Upgrade
+
+Upgrade by reinstalling the package through the same tool you used for the original install. If you originally pinned a version, note that `uv tool upgrade` preserves that pin; to move to the newest PyPI release, use an unpinned install command so you do not keep the existing version pin:
+
+```bash
+# Using uv
+uv tool install --force specify-cli
+
+# Or using pipx
+pipx install --force specify-cli
+
+# Or using pip
+pip install --upgrade specify-cli
+```
+
+> [!NOTE]
+> `specify self upgrade` currently rebuilds `uv tool` and `pipx` installs from the GitHub source release URL rather than preserving a PyPI-based installation. If you want to stay on the PyPI route, use the package-manager commands above. A plain `pip install specify-cli` is treated as an unmanaged install — upgrade it with `pip install --upgrade specify-cli`. See the [Upgrade Guide](../upgrade.md) for details.
+
+## Uninstall
+
+```bash
+# Using uv
+uv tool uninstall specify-cli
+
+# Or using pipx
+pipx uninstall specify-cli
+
+# Or using pip
+pip uninstall specify-cli
+```
+
+## Next steps
+
+Head to the [Quick Start](../quickstart.md) to initialize your first project.

docs/installation.md

@@ -11,9 +11,14 @@
 ## Installation
 
 > [!IMPORTANT]
-> The only official, maintained packages for Spec Kit come from the [github/spec-kit](https://github.com/github/spec-kit) GitHub repository. Any packages with the same name available on PyPI (e.g. `specify-cli` on pypi.org) are **not** affiliated with this project and are not maintained by the Spec Kit maintainers. For normal installs, use the GitHub-based commands shown below. For offline or air-gapped environments, locally built wheels created from this repository are also valid.
+> Spec Kit is distributed through two official channels, both published and maintained by the Spec Kit maintainers: the [github/spec-kit](https://github.com/github/spec-kit) GitHub repository (source installs) and the [`specify-cli`](https://pypi.org/project/specify-cli/) package on [PyPI](https://pypi.org/project/specify-cli/). Either route is supported for normal installs — use the commands shown below. After installing, run `specify version` as a local version/runtime sanity check. It confirms that the `specify` command is available and reports its version, but it does not prove whether the executable came from PyPI or GitHub. For offline or air-gapped environments, locally built wheels created from this repository are also valid.
 
-### Persistent Installation (Recommended)
+Spec Kit supports two install routes:
+
+1. **Install from source (GitHub)** — the recommended route, pinned to a release tag.
+2. **Install from PyPI** — install the published `specify-cli` package with your usual Python tooling.
+
+### Install from Source — Persistent Installation (Recommended)
 
 Install once and use everywhere. Replace `vX.Y.Z` with a release tag from [Releases](https://github.com/github/spec-kit/releases) — keep the leading `v` (for example, `v0.12.11`, not `0.12.11`):
 
@@ -30,12 +35,30 @@ Then initialize a project:
 specify init <PROJECT_NAME> --integration copilot
 ```
 
+### Install from PyPI
+
+Spec Kit is also published to PyPI as [`specify-cli`](https://pypi.org/project/specify-cli/), so you can install it with your preferred Python package manager without referencing the Git URL:
+
+```bash
+# Using uv (recommended)
+uv tool install specify-cli
+
+# Or using pipx
+pipx install specify-cli
+
+# Or using pip
+pip install specify-cli
+```
+
+To install a specific release, pin the version — for example `uv tool install specify-cli==0.12.11`. See the [PyPI installation guide](install/pypi.md) for details, including how to upgrade.
+
 ### One-time Usage
 
 Run directly without installing — see the [One-time usage (uvx)](install/one-time.md) guide.
 
 ### Alternative Package Managers
 
+- **PyPI** — see the [PyPI installation guide](install/pypi.md)
 - **pipx** — see the [pipx installation guide](install/pipx.md)
 - **Enterprise / Air-Gapped** — see the [air-gapped installation guide](install/air-gapped.md)
 
@@ -81,13 +104,13 @@ specify init <project_name> --integration claude --ignore-agent-tools
 
 ## Verification
 
-After installation, run the following command to confirm the correct version is installed:
+After installation, run the following command as a local version/runtime check:
 
 ```bash
 specify version
 ```
 
-This helps verify you are running the official Spec Kit build from GitHub, not an unrelated package with the same name.
+This confirms that the `specify` command is available and reporting the expected version. It does not prove whether that executable came from PyPI or GitHub.
 
 **Stay current:** Run `specify self check` periodically to learn whether a newer release is available — it is read-only and never modifies your installation. When you are ready to upgrade, follow the [Upgrade Guide](./upgrade.md).
 

docs/toc.yml

@@ -13,6 +13,8 @@
       href: upgrade.md
     - name: Install uv
       href: install/uv.md
+    - name: Install from PyPI
+      href: install/pypi.md
     - name: Install with pipx
       href: install/pipx.md
     - name: One-time Usage (uvx)